AUDI
DXT × AUDI
THE COLLECTION
The Commission · Full Build Sheet
Dextrous
Reads Audi.
Four rings. One principle — Vorsprung durch Technik. Advancement through technology. Audi's identity runs from the Group B rally stages of the 1980s to the electric drivetrains of today, and the two builds in this commission sit at both ends of that line.
The S1 Quattro E2 is the Group B legend — turbocharged, all-wheel-drive, period-correct down to the dials. The e-tron GT is the marque's electric statement — clean, charged, silent. Two eras, one hand, read panel by panel.
Nothing borrowed. Nothing approximate. Every detail pulled from the machine itself.
Painted
By Hand.
Kemora Grey was mixed in-house to match Audi's own paint code. The S1's engine was handpainted down to every nut. No decal. No print transfer.
The swoosh runs DTC — Dextrous Treated Carbon, a real 2×2 carbon weave finished through an in-house process, set against alcantara to mirror the cabin. The base earns the paint.
S1 E2 · Group B Rally Livery
The Builds.
Passion for motorsport meets the sneaker. A 1-of-one custom for Audi India, inspired by the Audi e-tron GT in Kemora Grey.
The shoe carries an entire electric vibe — clean, edgy designs with hints that point toward electric mobility. Kemora Grey was developed in-house to match the car's paint code, finished with a gloss overlay to mimic the bodywork.
Build 01 · Buildlogy
Kemora Grey
Finished in Kemora Grey — a paint colour developed in-house to match the car's paint code — with a gloss overlay to mimic the bodywork.
Charging Ports
Represent the charging ports on either side of the car, including a glow-in-the-dark and UV-activated status indicator.
Battery Pack
Shows elements from the battery pack, routed to the charging ports seen on the quarters and either side of the car.
DTC + Alcantara
Handcrafted with DTC — Dextrous Treated Carbon (real carbon fibre, 2×2 weave, in-house process). The other half uses alcantara to match the interior trim.
Diffuser & Under-Tray
Made to represent the diffuser and under-tray holding the battery pack. Special element: a handcrafted leather brake caliper to match the car.
LED Tail Cluster
Made to represent the LED tail-light cluster of the e-tron.
Group B Rally at centre stage. A 1-of-one custom for Audi India, inspired by the iconic Audi S1 Evolution 2 Group B legend.
The finest build to date — every element carries a meaning, pulled from the car. Packaged with a specially themed AIRBOX storage unit that reflects all the dials of the S1.
Build 02 · Buildlogy
Rally Livery
Finished in yellow to match the rally livery, including all scaled sponsor logos.
Race Number
Represent the side doors that show off the race number.
Handpainted Engine
Shows the entire engine handpainted — every detail down to every nut. The other toe reflects the hood over the engine.
2 Replaceable Sets
1. Aluminium laser-cut swooshes reflecting the rollcage. 2. Polycarbonate clear swooshes extending into the livery, with Audi branding laser-etched. The base swoosh acts as a chassis to the M3 screws, held by M3 domenuts.
Livery Extension
Acts as an extension to the livery of the car, including all the sponsor logos.
Twin Radiator Fans
Below the backtab are the iconic twin radiator fans as seen on the rear of the S1.
E·AirBox.
We believe in an immersive unboxing. Each product that receives a storage unit ships in a wooden crate — screw-fixed, with rubber-slotted insides to prevent shock — so opening it feels like uncrating the car itself.
The themed AIRBOX is built from 6mm clear acrylic on an aluminium back chassis, housing a high-spec acrylic cube with rounded edges and a matte-black backplate, bolted with stainless steel. The backplate resembles the instrument cluster of the S1, made to scale — period-correct late-'80s fonts and light effects. Stack it or suspend it.
Transport Unit
Wall Mount
Chassis
LED Lights
Colours
Powered
App Control · LED Operations
The E·AirBox is electronic — aftermarket RGB LED lights, heat-insulated and app-controlled. AC powered: mount it, plug it in, and integrate it electrically. Compatible with iOS & Android, and fully voice-controlled.
Two Builds.
One Bench.
One.
Of.
One.
Each pair in this commission exists once. Each VIN is registered, permanent, and tied to a six-point authentication document that ships with the shoe. No reissue. No reproduction.
If it doesn't survive the bench, it doesn't ship.
Your Marque.
One Pair.
Every automotive commission begins with a brief. Send the model, the livery, the number, the story. Dextrous reads it and builds it — by hand, once, correctly.
Start the Commission
